Waste Water Facilities

X-O Neutralizer (XR) and Concentrated X-O Odor Neutralizer (XC) are used to eliminate nuisance odors of every kinds so that down wind there is no product odor or problem odor. X-O works by a safe physical bond-like process in the air. There is no danger to people or the environment from X-O. X-O is non-toxic and biodegradable. Concentrated X-O Odor Neutralizer (XC) has twice the active ingredients of X-O Neutralizer (XR).

Headworks: Spray nozzle applications – dilution rate 50 parts water to 1 part XC.

Clarifiers: If dome Covered – spray nozzle application within the dome – dilution rate 50 parts water to 1 part XC. Uncovered – set up Lechler nozzles at 20’ intervals on the rail – dilution rate variable – starting at 50 to 1 and extended by steps of 50 until best dilution rate is determined.

Dewatering/Grit Extraction Buildings: Set up Lechler nozzles spaced 20’ apart, 10’ high – dilution rate: variable 50 to 150 parts water to 1 part XC.

Air Scrubbers: Charge rate 1 part XC to 500 parts water. Thoroughly flush out previously used chemicals before charging with X-O solutions. (X-O performance is adversely affected by strong oxidizing agents).

Trickle Filter Towers: Charge rate 1 part XC to 150 parts water.

Sludge Lagoons: Set Lechler spray nozzles every 20 feet in an “L” configuration on two sides of the lagoon. Dilution rate: 1 part XC to 500 parts water.

Lift Stations: Set nozzles in the wet well – dilution rate: 1 part XC to 100 parts water.

Note: The above dilution rates are for XC and are a conservative guide. XR is half the strength of XC, therefore twice as much product will probably be used.

Visit our web site, www.air-freshener-xo.com for Material Safety Data Sheets and other technical information.